Description

VersaFlex FSS 45DC is a fast set, rapid curing, 100% solids, flexible, two component polyurea elastomer spray coating material. FSS 45DC is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on concrete and other substrates. Its extremely fast gel time makes it suitable for applications down to -20⁰F without special conditioning of the component resins and isocyanates. FSS 45DC produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1000 mils. FSS 45DC may be applied in all positions and to any suitably prepared substrate. FSS 45DC is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. FSS 45DC is relatively mositure and temperatureinsensitive, allowing application in the most problematic ambient conditions.

Applications & Uses

VersaFlex FSS 45DC is a superior coating material designed specifically for industrial applicationsreceiving constant or intermittent attack from contained materials, subsurface hydrostatic pressure, most corrosive substances, and abrasive action. FSS 45DC is flexible, accomodating movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or without reinforcements FSS 45DC may be used in transitional areas with confidence. FSS 45DC may be used in interior or exterior applications.  FSS 45DC is recommended for repair of other films, may be applied to concrete and other substrates, in new construction and in cold weather conditions, cold storage facilities, freezers, and food processing plants where time and temperature are serious concerns.