Description

VersaFlex AquaVers 405 is a fast set, rapid curing, 100% solids, flexible, two-component pure polyurea elastomer spray coating material. AquaVers 405 is potable water approved in accordance with ANSI/NSF 61. AquaVers 405 is used by itself or in combination with other materials to produce coatings, liners, wearing courses and resiliient surfaces on concrete and other substrates. Its extremely fast gel time makes it suitable for applications down to -20^o F without special conditioning of the component resins and isocyanates. AquaVers 405 produces an extremely tough film  at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1000 mils without appreciable sag or runs. AquaVers 405 may be applied in all positions and to any suitably prepared substrate. AquaVers 405 is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. AquaVers 405 is realtively moisture and temperature insensitive, allowing application in the most problematic ambient conditions.

Applications & Uses

VersaFlex AquaVers 405 is a superior coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, subsurface hydrostatic pressure, most corrosive substances, and abrasive action. AquaVers 405 is flexible, accomodating movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or without reinforcements AquaVers 405 may be used in transitional areas with confidence. AquaVers 405 may be used in interior or exterior applications. AquaVers 405 is recommended for repair of other films, may be applied to concrete and other substrates, in new construction and in cold weather conditions, cold storage facilities, freezers, and food processing plants where time and temperature are serious concerns.